...finished the nozzles and the tail sections of the engine-nacceles. Also made the servo-pushrods, glued in the servos, finished the servo-harness and programmed the TX.
But I guess I fried one ESC during programming
Finally checked the CG: and once again I have built a nose-heavy bird! The CG is about 100mm (4") too far forward with the planned 3s-5000mAh accu. So I have to redesign the accu-compartment
Same happend to my Nemesis and the Henschel HS-129 - but I guess its much better to be nose- than tail-heavy