ESC control through controller
I have bought a hobbyking 20 amp ESC ( http://www.hobbyking.com/hobbyking/s...ontroller.html
). The red of battery is conncted to red of ESC and black to black.The throttle signal comes from the controller to white wire of ESC a 50 hz sq. wave with a 10% duty cycle(18 ms low,2ms high). The three output wires of ESC drives the motor. But the motor does not show any movement. What's wrong i am doing?
I hear 3 rapid beeps and when i connect the ESC and then beep after beep with a difference of about 8 to 10 seconds.