Originally Posted by chemnut842
Ok so I built the SPW for the first time and it looks alright but performs awful. I recorded a LOS flight and upon reviewing the vid, there is no way anybody could fly fpv with this.
There are slight problems with my antenna. After reading I think the problem is my feed gap. I measured mine to be 9.5mm and I did not incorporate any hooks into the center joint.
Both Tx and Rx antennas are RHCP (RHCP = tractor prop, LHCP = pusher prop?) and the Tx antenna is a CL.
A pusher prop behaves the same as a tractor one.
RHCP is the conventional clockwise screw thread type.