View Single Post
Old Jan 04, 2012, 06:04 PM
pmackenzie is offline
Find More Posts by pmackenzie
I don't want to "Switch Now"
pmackenzie's Avatar
Toronto (Don Mills), Canada
Joined Dec 2002
18,169 Posts
Quote:
Originally Posted by vinc29 View Post
I've made some tests with a LP4DSM module, it's only 6 channel but it has the 'model match' capacity.
The second byte is used to give the model number.
I've tested with 3 orange/spektrum receivers, it works just as fine as with my dx6i.
And for information, it can bind up to 256 different receivers

I've also tested some more fun: I send one frame every 11ms but alternate the model, I'm able to control 2 receivers with differents orders at the same time.
=> You can build some very large models with lot of servos/motors for very cheap, you only need 6 channels receivers.

I tried the same thing, but it made no difference at all
Value of the second byte seemed to have no effect.
I will have to try it again.

Pat MacKenzie
pmackenzie is offline Find More Posts by pmackenzie
Reply With Quote