View Single Post
Old Jan 02, 2012, 11:09 PM
cbergen is offline
Find More Posts by cbergen
Registered User
Joined Jun 2004
170 Posts
Hmmm. While I cannot tell you that the upgrades will fix your problem, they are fixes to other bugs or setup concerns.

I would have to suggest that your vibrations are from some other source, and you are simply masking it with tricking the Z numbers. When trouble shooting problems, it's always best to eliminate the "easy" things. Set your numbers correctly per the manual and assistant, do the firmware upgrades and ensure afterwards that all settings are correct. Some firmware updates reset or put back to default certain settings, so you MUST double check all of them. If the problem persists, then we may need to look at your hardware choices.

Electronics are funny things, and with something new like these items from DJI, there is always a learning curve as to what components are compatible, for instance it was learned the hard way that some FBL electronics do NOT like 2 stage Turbine powered helicopters...
cbergen is offline Find More Posts by cbergen
Reply With Quote