View Single Post
Old Jan 02, 2012, 02:27 PM
Chairwolf is offline
Find More Posts by Chairwolf
I think it'll work this time!!
Chairwolf's Avatar
399 feet above Roanoke, VA
Joined Jan 2007
3,461 Posts
Quote:
Originally Posted by TexasAggie View Post
My SPW didn't perform as well as my cloverleaf with another cloverleaf on the Tx so I'll take that one apart and try again.
I just checked the lengths on Alex's posts -

for 1280mhz:

Cloverleaf:

Long wire: 18.9" or 479.5mm for the Cloverleaf on 1280mhz.
Short wire: 9.44" or 240mm for the Cloverleaf on 1280mhz.
Quarter Wave: 2.36" or 60mm for the Cloverleaf on 1280mhz.

Skew Planar Wheel:

Long wire: 18.49" or 469.8mm
Short wire (not listed, but 1/2 would be 9.245") or 234.82mm
Quarter Wave: 2.31" or 60mm

I don't know if this was the cause of the problem, but I hope it might help!

Bob
Chairwolf is offline Find More Posts by Chairwolf
Reply With Quote