Thread: Discussion TopFlite Cessna 182 Skylane
View Single Post
Old Dec 31, 2011, 02:47 PM
stegl is offline
Find More Posts by stegl
Kelowna , BC
Joined Nov 2008
2,716 Posts
Cessna 182 build

Here are the setups of the flap horn and Dubro ball and socket. The horns are 3 ply each and shaped the same as inner horns. They will be glued in permanently when flaps are primed and sanded. Makes for easier sanding.

Moved the horns on the right flap for better servo placement. I am using ATX 94820 digital servos for 50% more power at 76 oz/in ,lighter with metal gears. Also the same servos on the ailerons.

Also setting up servo plugs into one plug when installing the wing at the field for faster setup and flying with no chance of having the servos plugged incorrectly.
stegl is offline Find More Posts by stegl
Reply With Quote