View Single Post
Old Dec 12, 2011, 08:34 AM
376782 is offline
Find More Posts by 376782
Registered User
Near Kingston, Ontario, Canada
Joined Dec 2004
394 Posts
Originally Posted by extreme heli View Post
I mean connect all 3 of the pins (JR servo lead wires) together and leave it that way, no switch. Plug in AC power to turn on, unplug AC to power down. Have charger connected prior to powering up system.

Thanks for your reply. I have the 3 pins permanently tied together but the resistor in series with the fans still resutl in a fan failure after approximately 5 seconds. I will try putting a load on the supply to see if this solves the problem.

Thanks for your help.

376782 is offline Find More Posts by 376782
Reply With Quote