View Single Post
Old Dec 07, 2011, 08:50 PM
pecanpatch is online now
Find More Posts by pecanpatch
Home of "Golf Cart Flying"
pecanpatch's Avatar
Griffin GA
Joined Aug 2008
9,561 Posts
Recomended Electronics

There are so many ways you can go here. There are Hobby King $6.99 motors that will work great.
I like to keep the RPM's down and a good climb rate using 10" props.
Below is what my plane has on it, and it flies great.

E-flight 400 outrunner- 920 KV
E-flight 20 Amp ESC
Exi 9G digital servos w/metal gears. Hitech HS65's are pretty good too.
You need (2) 18" long aileron extension wires.
10 x 4.7 APC prop
Pushrod wire is .062 piano wire
control horns are at the users discretion.
2000-2200 mah 3S LiPo

Note: Dont chinch on the servos. HS55's are not gonna cut it. You breath on them and you will strip the gears inside. Use a 9G servo or bigger.

I'm not an expert on whether this or that motor will work. There are other forums that can get you an answer on stuff like that.
pecanpatch is online now Find More Posts by pecanpatch
RCG Plus Member
Last edited by pecanpatch; Dec 19, 2011 at 06:32 AM.
Reply With Quote