View Single Post
Old Nov 13, 2011, 11:58 AM
extreme heli is offline
Find More Posts by extreme heli
Registered User
Joined Jan 2011
17 Posts
Thats right John, it's not for the average hobbist or electronics tinkerer, such a project is certainly backed with some expert knowledge and specific equipment.

Yes the thermal stability of the PS is entirely in the hands of the operator with this mod. I do have temp probes mounted on the intake airflow, both supplies exhaust, & large heatsink i put on controller's mosfets. So I do have a real time indication of temps displayed directly under the corresponding RPM I have them set to. The draw on the supplies indicated by my power analizer gives me the indication of RPM rage I should be in to keep to my own boundaries, confirmed or tweaked by temp figures.

If enough people are interested perhaps we can look at selling some PWM Emulator/Generator units ready to go. Again not entirely up to me but if I can get an idea of how many are interested we might be able to put it together. Components were quite minimal from what i remember.

The reading of 32.0F below on my controller is a bad sensor to be replaced.
extreme heli is offline Find More Posts by extreme heli
Reply With Quote