: Build Log
Alien Aircraft Raven Build Log
View Single Post
Nov 05, 2011
, 10:51 AM
The Villages, Fl.
Joined Oct 2002
Nolebotic, here are some pictures of both planes and a couple of the retract system. I did increase parts of the plans on my printer by 10% to build the larger one.
You will have to fiddle with the wires that connects the servo to the retract. It will take a while to get them right. Also be sure to file a flat spot on the landing gear leg where the grub screw holds the leg into position. Donít screw it to tight or the plastic will crack. File a flat spot where the axel is attached to the leg.
When all the retract adjustments are complete and working well then cover the servo opening .
View all Images in thread
It will take some time to get the right bends in the wire.
Here you can see the grub screw.