Originally Posted by Tipstar
Thanks for advice.
I am going to try those optimization on this weekend.
I have a question.
Is spindle shaft of the Taort 250FL compatible with the Microheli head?
Glad I could help. I don't know about the spindle shaft but I suspect it could be the same. The dimensions of the head look very similar and I suspect it's a copy of the Microheli head.
If you can find a spare parts list for the Microheli, check out the blade holder bearing sizes, and see if they are a 3mm inner.
It certainly looks like it but you get washers and better looking screws.