I used some 18 amp hobbywing pentiums and they are fine
Originally Posted by Nek
I flashed an RCTimer 18A ESC this morning and it seems to be working just fine on the bench.
I used the latest tgy hex file (tgy-2011-10-12.hex). I don't know if it matters but I had this ESC programmed with stock firmware and flying on a quad prior to flashing. When I fried my 10A ESC they had never been powered on prior to the flashing.
I will flash 2 more already flying RCT 18A and test fly them on a tricopter. Then I'll try flashing some more 18A without flying them prior to the flash and I'll report if it went any different.