Originally Posted by eschult
The only thing that cracked was the elevator but it looks like i have to take the rudder to get to it. I guess I do not have to pull the horizontal stab off if there is nothing wrong with it. I would just cut the hinge tape and replace.
Oh yeah, That is a simple job. Just get a fresh Xacto and cut the hinges for the rudder and remove, then do the same for the rudder. It can be a bit of a PITA if you have to put new hinges in the same slots as the old ones, you have to do your best to cut in the with the xacto and work the glue and old hinge free. If you can simply move you hinge points over a bit it is much easier. Definitely do not use the dremel for any of this!