I have a fun bat that I just built. Flew it for the first time tonight with 70% dual rate on ailerons and 70% on elevator.
Had problem with plane porposing. flew just ok at half throtle when I would go full throtle the plane would want to really climb bad. may need to mix in some down elevator as throtle increases.
Have COG at about 2.25 inches back from leading edge
using a 3s 1300 mah battery
this is the motor I am using turnigy 2730-3000
2 hxt 900 servos
and a mystery 30 esc
any help would be appreciated to get this thing flying good and level, didnt seen to have a lot of power and you could hear vibration at full throtle, prop is not knicked or anything like that nor is motor shaft bent.