enjoying my FunBat so much that I'm considering making a larger version. Shooting for 40" wingspan to allow either 2200 3 cell or 1800 4 cell, 40 amp esc and this Turnigy 1700 kv motor
Should work according to this HK review...
"Using in a funjet, 4cell 1500mah rhino Lipo, apc 6x5.5e prop, Pulls 30amps on a 40amp turnigy esc, speed is 99.3mph in level fligh tested with gps... everything comes down cool, this is a perfect setup for a funjet"
I'm running the same 3 cell set up on my GWS FW190 and it scoots around faster than my Phase 3 F-16!
Will use 6mm depron KFm-4 wing and will make the wing removable.
What do you think?