Originally Posted by RC_Feen
So here is my planned power setup:
Switches: Two of these
Battery Packs: Two of these
..one for Rx one for ignition
Voltage regulator for Rx: Need suggestions.
Does this look like a good power setup? Or should I run a larger mAh pack for the Rx? Thanks for the help...
Looks like a fine set up. If it were me, I would run two A123's...one 1100 on the ignition with a simple voltage reducer (from wrongwayrc) and a 2300 A123 for the Rx and you won"t need a regulator for it. You can even do a 4.8Nimh on the ignition and you wouldn't need a voltage reducer. However, if you do the dual A123's, one charger will keep you flying all day