View Single Post
Old Oct 01, 2011, 12:19 AM
kushal_22 is offline
Find More Posts by kushal_22
Registered User
kushal_22's Avatar
Kamloops
Joined Dec 2001
6,844 Posts
Actually Tres
You can set it
Turn on your tansmitter put throttle to full then plug in whatever UM you are flying that has BL motor listen for the tones then move throttle to mid point wait for tones move throttle back to full wait for the beeps 1st you get one beep wait and you will hear 2 beeps wait some more and 3 beeps wait some mre and 4 beeps once you hear the 4 beeps bring throttle to "Off" position wait for tones and unplug battery you will then be set for Strongest brake its a full 15 second wait to get to the 4 beeps. Remember you have to have the throttle at full wait for tones go to half throttle then back up to full and THEN wait through the three other settings it takes 15 seconds to get to the setting you want.

Mal
kushal_22 is offline Find More Posts by kushal_22
Last edited by kushal_22; Oct 03, 2011 at 02:02 AM.
Reply With Quote