Thread: Discussion RVOSD - V5 - reports
View Single Post
Old Sep 30, 2011, 02:31 PM
BushmanLA is offline
Find More Posts by BushmanLA
Registered User
BushmanLA's Avatar
Joined Dec 2005
1,823 Posts
Quote:
Originally Posted by SpookiePower View Post
Thanks Ommadawn

I have not touch this HDOP setting in the menu - but I'll take a look at it.

When "Setting home" shows up on the screen, and it starts to count to 200 - what does this means ?
It doesn't lock on immediatly after the HDOP gets below the threshold value. It has to stay below for the 200 count.

This ensures that you don't get the wrong place set as home from a single quirky HDOP reading below the threshold.

Also, remember to do this with your RVOSD. Power it up, let it calibrate and lock. Then put it down and so that it is mostly level and not moving and restart it with the remote.

It has to warm up before it can do the best calibration possible and moving around you do when plugging in the battery can throw off the calibration a little, so a warm reset is always good to do.
BushmanLA is offline Find More Posts by BushmanLA
Reply With Quote