Sep 15, 2011, 11:10 PM
United States, LA, West Monroe
Joined Dec 2010
900MHZ 100mW Tx/Rx & 1/3-inch Sony CCD Camera NTSC
Up for sale today is my 900MHZ 100mW Tx/Rx & 1/3-inch Sony CCD Camera NTSC FVP Setup. The items were bought new and were only hooked up once to make sure everything worked. The transmitter antenna was the wrong type
when I originally got this kit, so I purchased a 900MHZ 3dBi High Gain Whip Antenna that can be seen in the pictures. Also included is a power plug to connected to a 3S lipo and a video cable that will connect to a GoPro camera that
I also purchased. No instructions were included with this kit, but are easy to find in the forums.
Price: $50 shipped and paypal'd conus
Below Is the manufacturers description taken from there website.
12 Channel 900Mhz Tx/Rx video system with CCD camera. Great for FPV systems in countries with restrictive RF power output. The 100mW system is legal in most countries.
Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage.
If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
1 x SONY CCD 1/3inch Camera
1 x 900Mhz 8 channel Video Transmitter (100mW)
1 x 900Mhz 12 channel Video Receiver
CCD sensor type:1/3 color SONY CCD
NTSC: 510(H)*492(V) (Included)
Scanning system: Interlaced scanning
Horizontal resolution: 420TV line
Minimum Illumination 0.01LUX/F1.2
S/N Ratio: 48dB
Gamma Modification: 0.45
White balance: Auto
Auto backlight compensation: Auto
Input voltage: 9~12.6V
Electric current 80MA
Electronic Shutter: 1/50 (60) ~ 1/100,000s
Video output: 1.0VP-P composite video
Operation Temp.: -20~50
Flight time: Approx 60min/100mah 3S
FPV Tx Spec.
Channel: 8-Ch, AV synchronization
Input voltage: 12V
Frequency: 0.9G 0.910G,0.980G,1.10G,1.040G