View Single Post
Old Sep 13, 2011, 08:15 PM
kenzietech is offline
Find More Posts by kenzietech
Registered User
Joined Sep 2011
127 Posts
MIFlyer,

Thanks for the quick response! I just looked, and my manual didn't show anything regarding the actual part number itself. I found a manual for it on Harbor Freight's website, and it just said part #14, Speed Controller.

I did some digging around the main RCGroup's Wid Hawk page, and someone mentioned being able to use the Dynam parts as replacements to the Wild Hawk. Further, I also found someone that said that the ESC was 25 Amp, so I would guess that it was the same as the ESC-25A that you mentioned.

Do you know where I can get a replacement ESC-25A? Or if better, where I could to go get a 30/40Amp replacement ESC? Again, I am completely and utterly stupid with this, and am just learning, so I need a how-to idiot's guide on where to go to get the right pieces that are compatible with each other! Furthermore, will the 30/40Amp replacement be OK with the stock motor?

Thanks again!

---

*EDIT*

I just looked around, and found two Brushed ESCs on HobbyKing's website:

http://www.hobbyking.com/hobbyking/s...idproduct=6460

http://www.hobbyking.com/hobbycity/s...idProduct=6468

The first was found when looking for an ESC-25A, and the second was found just when looking for cheap replacement ESCs. Would either of those be compatible with the WH? Also, I know the WH has the on/off and reset buttons. Both of those two look like they're just wanting on/off power, and don't contain any circuitry for the on/off and reset switches. Am I missing something with those?
kenzietech is offline Find More Posts by kenzietech
Reply With Quote