View Single Post
Old Sep 11, 2011, 09:40 PM
Cambo is offline
Find More Posts by Cambo
Registered User
United States, AZ, Phoenix
Joined Apr 2006
529 Posts
I had a voltz pack that was poorly crimped. Wiggling the balance wire made the voltage fluctuate from like 2.75V to over 4v on the charger. I pulled each individual wire from the balance connector and checked how well they were crimped. Sure enough, one had almost zero metal to metal contact.

Also, the voltage measurements on the balance tab and the power leads are not the same, ie the charger can measure the main leads independently of the balance leads. If the main voltage of the pack indicates the proper voltage its probabley a bad connection somewhere. So your charger should be reading like 23.7 in the main charge menu. If it is less, closer to 23 your pack is bad.
Cambo is offline Find More Posts by Cambo
Reply With Quote