View Single Post
Old Sep 07, 2011, 07:32 AM
malcr001 is offline
Find More Posts by malcr001
Registered User
malcr001's Avatar
United Kingdom, England, Gt Lon
Joined Nov 2007
2,646 Posts
Quote:
Originally Posted by haidar View Post
I just got mine 1 day ago. These are what i encountered today:
1. It came with 14 size props! No instruction manual, parts completely built up
except for the props, camera mount and landing skids which i had to fix up
myself.
2. The low voltage warning beeper was dangling loosely.
3. Test fly with a lumix TZ7 camera (200gm) on the camera mount, it could carry with no problem.
4. I only did a test fly of 3 minutes.
5. The shutter servo was too low so i adjusted the height for the servo and the
servo arm. As i was adjusting the servo arm travel, smoke came out from the
board. I yanked the lipo off and found out one of the ESC chip fried. I used a
2600mah 3S lipo.
6. Besides that, the case that came with it shows sign of used.
7. The props looks like they were used too.
Please answere my question above Im trying to get a hold of one but get no replies. Also please take a close up photo of the arms where it clips into place. How does it work?
malcr001 is offline Find More Posts by malcr001
Reply With Quote