View Single Post
Old Sep 07, 2011, 07:29 AM
haidar is offline
Find More Posts by haidar
haidar's Avatar
Malaysia, Selangor, Petaling Jaya
Joined Sep 2008
165 Posts

I just got mine 1 day ago. These are what i encountered today:
1. It came with 14 size props! No instruction manual, parts completely built up
except for the props, camera mount and landing skids which i had to fix up
2. The low voltage warning beeper was dangling loosely.
3. Test fly with a lumix TZ7 camera (200gm) on the camera mount, it could carry with no problem.
4. I used a 2600mah 3S lipo.
5. I only did a test fly of 3 minutes.
6. The shutter servo was too low so i adjusted the height for the servo and the
servo arm.
7. As i was adjusting the servo arm travel, smoke came out from the
board. I yanked the lipo off and found out one of the ESC chip fried.
8. Besides that, the case that came with it shows sign of used.
9. The props looks like they were used too.

haidar is offline Find More Posts by haidar
Last edited by haidar; Sep 07, 2011 at 07:43 AM.
Reply With Quote