View Single Post
Old Sep 06, 2011, 02:01 PM
creapyd is offline
Find More Posts by creapyd
Prefectionist
United States, MN, Minneapolis
Joined Mar 2007
1,393 Posts
Thats for the 1100kvt motor. he's got the 1400 kvt motor. I'd start ~9x6 and watch your amps.

Quote:
Originally Posted by EQ45 View Post
@krexken


On HK site http://www.hobbyking.com/hobbyking/s...dProduct=16230 they give the list of prop test:


8x4 - 14.8v - 251W - 17A
8x4 - 11.1v - 121W - 11A
9x6 - 11.1v - 178W - 16A
9x6 - 14.8v - 355W - 24A
10x5 - 11.1v - 200W - 18A
10x5 - 14.8v - 385W - 26A
11x5.5 - 11.1v - 200w - 20A
12x6 - 11.1v - 266w - 26A

According to that 12x6 is suppose to be possible.

If I can have a little bit more power with that motor and the 10 x 5 original prop so that knife edge is possible (with the stock motor and 9x4.7 prop it look to be not possible)
creapyd is offline Find More Posts by creapyd
Reply With Quote