View Single Post
Old Sep 03, 2011, 12:55 AM
EQ45 is online now
Find More Posts by EQ45
Registered User
Joined Jul 2011
81 Posts
@krexken


On HK site http://www.hobbyking.com/hobbyking/s...dProduct=16230 they give the list of prop test:


8x4 - 14.8v - 251W - 17A
8x4 - 11.1v - 121W - 11A
9x6 - 11.1v - 178W - 16A
9x6 - 14.8v - 355W - 24A
10x5 - 11.1v - 200W - 18A
10x5 - 14.8v - 385W - 26A
11x5.5 - 11.1v - 200w - 20A
12x6 - 11.1v - 266w - 26A

According to that 12x6 is suppose to be possible.

If I can have a little bit more power with that motor and the 10 x 5 original prop so that knife edge is possible (with the stock motor and 9x4.7 prop it look to be not possible)
EQ45 is online now Find More Posts by EQ45
Last edited by EQ45; Sep 03, 2011 at 04:11 AM.
Reply With Quote