Originally Posted by Brownie433
I have a V2 SHP with a tad over 200 flights. I was thinking of trying V3 wings with the SFGs to help my harriers.
Will the V3 wings work on a V2 fuse? Same spar size, same position on fuse, some anti-rotation point? This may be something only the vendor can answer since they know the specs or anyone who owns both air frames.
I'm not the vendor... nor do I know if the wings will work... but if it turns out the wings don't fit, you could try making some custom SFG's:
You should probably beef up the wood so it's not as flimsy since it won't be between the wing and the stock SFG's... and you may want to use a wood screw to install them, then take it out, soak the hole with some thin or medium CA, the after it's dry re-install them.