Thread: New Product ESR / IR Meter fo Lipos
View Single Post
Old Aug 19, 2011, 06:18 AM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Haralson County GA. USA
Joined Oct 2004
34,852 Posts
Post #189

Quote:
HI. I have a couple xmitter 3 cell lipo packs that have internal resistance of 4.1, 3.8, 280.1; cell 1 , 2, 3 respectively. Yes, 280 milliohms for cell #3. They are new. Have only been charged 2 or 3 times on an FMA lab 8.

#193

Quote:
Hi guys. I'm using FMAs powerlab 8. Lipos r for xmitter use only. For a 6S pack the IR readings range from 4.x to 5.x (all 6 cells).
Reads to me problem is with Trans. LiPolys only. Most likely some type of circuite in the pack that is causing this.

FWIW I have a total of six FMA chargers which read IR and they are all extremely close to one another and aalso just happen to closely match results obtained by other using Wayne's meter.

Charles
everydayflyer is offline Find More Posts by everydayflyer
Reply With Quote