Originally Posted by hubibubi
This time my FlyduSpider, for an original 8" propeller model next to a pimped for 10 inch propeller.
The larger model has a detachable mount GoPro. There were renewed only in accordance with the arms, thus not affecting the front surface and a camera I can top touched down. the regulator I have arranged in another plane, thus there is a frame from 3 plates.
10 inch spider, Premium 18A ESC, KDA 20-26M, 3S2200 LiPo, Flyduino FC v1.0 + Jussi 9DOF IMU 1.22L.
8 inch Spider: Keda ESC 12A, KDA 20-26M, 3S2200mAh, FC: Paris v3 9DOF 1.22L IMU or Flyduino with JussiH IMU
Soft is the current version v1.8 on it
Attachment 4209811Attachment 4209813Attachment 4209812
both are looking great!
I have some questions on the 10in spider:
1.) what type of landing gear do you use (comes from which heli)?
2.) did you cut one of Pauls frame plates to form the upper deck or did you rebuild one from scratch?