Originally Posted by Tom Frank
As does sharpening, saturation reduction, "hot spot" color correction and vignetting brightness/color correction
(the latter being less of an issue with the stills due to the smaller 640x480 subsampled image from the sensor.
If we could only get a better CMOS/lens module, much of this would not be needed.
I know it looks very fiddly in the soldering department, but might it be possible to purchase a better CMOS/lens module if the price is okay and upgrade the #11
Looking at the photos of the CMOS ribbon cable there are 24 solder points but some them may not be used.