View Single Post
Old Jul 16, 2011, 10:54 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
San Jose, CA
Joined Jan 2008
31,953 Posts
Originally Posted by Ohio AV8TOR View Post
This makes very good sense, anyone else using them? What is the proper way to use this with an external BEC as I take it you still have to disconnect the red wire.
I use them, and love them. The lead to hook to the computer is long, the one to the receiver is much shorter, so you will probably need an extension, so. if using an ESC with a built in BEC, and you are using a separate BEC, then remove the center wire of the extension. If your ESC does not have a built in BEC, don't remove it

Oh...and to make sure that the Quick Connect stays connected to the throttle lead, I put put a shrink tubing over the Quick Connect, and the throttle lead, and shrink it down.

SteveT. is online now Find More Posts by SteveT.
RCG Plus Member
Latest blog entry: My hangar...
Reply With Quote