Originally Posted by tc3wins
will work on hooking up the board in the morning. and I will take pics and video.
Really sorry for the radio off as busy on wok schedule.
For the XXControl 1.5d, we manage to get the LCD output from the KK Plus via the 10 pin programming port. (Thanks to Mike so you dont need to unplug any motor/ESC cable to have the LCD working)
Here is the connection if you do pin to pin connect:
Pin 10 - Ground
Pin 2 - 5V
Pin 9 - RX
So the 3 cable provided, you can take out the pin and plug in or like me use the FC-10 connector and clamp in the cable as picture.
If you flash it to other XXControl like 1.4x, you need to follow the readme file that comes with the firmware on connection location.
Video of how I flash it with the bootloader will be up soon.
All the current KK Plus are shipped with bootloader. I will post up the Flashtool to RCG and the webstore for easy download.