View Single Post
Old Jul 14, 2011, 09:11 AM
erazz is offline
Find More Posts by erazz
Registered User
erazz's Avatar
United States, NJ
Joined Jun 2004
1,746 Posts
Guys, I've been looking over Mike's solution to the Flight Mode trims and it's fantastic IMHO!

Very simple, smart and inline with the er9x credo. Way to go!

Like the rest of the FW, once you understand how it works it's super easy to use.
1) Pick any channel that won't go out to a servo.
2) Open a new mix on that channel.
3) The "src" is the stick that you want to have the trim on. For example: if you want to have a FMtrim on the elevator simply choose "ELE".
4) Turn on "FlModeTrim".
5) Choose a switch to turn on the trim.

That's it.
When the switch is "on" the trim will be stored in the offset value for that mix. When the switch is off you have the regular trim in place.

btw, you can "gang up" on channels. That is - the output doesn't matter so you can put all these mixes on one channel.

I know it's hard to grasp at first but it works great. Thanks Mike!
erazz is offline Find More Posts by erazz
Reply With Quote