Thread: Download 24" span SU27/Eagle/f22 trio
View Single Post
Old Jul 13, 2011, 10:08 AM
davereap is offline
Find More Posts by davereap
Registered User
davereap's Avatar
Ashford. Kent. England
Joined Feb 2005
7,513 Posts
orlandomax56.. you can contact members directly by PM or email, by clicking on their name.. then on their page is the link for messaging

No sorry Ive never done all the parts, It is supposed to be a simple build.. measure and cut, go by the drawings in post 95 this is the main full shape..cut out one of this shape in 6mm depron or similar.. The pink areas are two extra layers which get directly laminated to the main layer..one on top one below.. The red area are the control surfaces which get cut from the main shape and hinged with tape...
Then go back a few more posts to see the fuzz construction..its all profile, vertical sections glued to the wing
The accuracy you use is up to you.. I just eyeballed the shape looking at some 3D views..
The lower Fuzz splines are all the same depth to allow the cross bars to fix easier, they were all mounted vertical, although the F22 has angled outside sides..
either way will look ok. the top shape again was just an eyeball version, I used two layers to give it more strength
more info is back a bit further ...put google sketchup on your PC and have a look at the file in the zip at post 84..this gives more of an idea of how it goes together.

the only info missing is the tail fin shape. so here it is
davereap is offline Find More Posts by davereap
Last edited by davereap; Jul 14, 2011 at 02:52 AM.
Reply With Quote