View Single Post
Old Jul 01, 2011, 03:04 PM
Tom Frank is online now
Find More Posts by Tom Frank
Dance the skies...
Tom Frank's Avatar
United States, MA, Walpole
Joined Dec 2003
19,012 Posts
Quote:
Originally Posted by SpookiePower View Post
I have done this operation once before, on my first camera and it went just fine.

Here is what I did -

I put the memorycard into my cardreader, did a Quick format. Copied the firmware file onto to card. Put the card into my camera, try to turn the camera on, but the camera will not turn on - it stays turned off. The camera is fully charged.

I will try to find some more help, searching this threadt.
Mine did that ONCE, but using the USB connection process outlined in the FAQs revived it, and I has flashed in firmware at least a dozen or more times since then with no issues. The Rel2 firmware does take a bit longer to flash in, though... 11 to 12 secs. for the yellow LED to come on in my last one. Good luck. I'd keep trying it.
Tom Frank is online now Find More Posts by Tom Frank