View Single Post
Old Jun 26, 2011, 01:10 PM
pcnewman is online now
Find More Posts by pcnewman
Registered User
United States, NC, Charlotte
Joined Oct 2008
209 Posts
Discussion
Cheap lightweight mount fot Keychain Cam on Hobbyzone Chsmp

I put a tab of Velcro just behind the battery compartment and as far back as possible on the camera. Then I rolled a business card to make a sleeve and to act as a shim to provide some downward angle. Taped the sleeve into place and cut the tape away in front of the lans. Fed some piano wire thru the sleeve, bent sme offsets to clear the wheel pants and hooks to attach the rubber band to. Pretty crude but lightweight and you can pull the camera away from the velcro to get to the battery connector.
pcnewman is online now Find More Posts by pcnewman
Reply With Quote