Thread: Mini-Review Hausler 450 v2 RTF
View Single Post
Old Jun 16, 2011, 08:06 PM
monkeyhanger is offline
Find More Posts by monkeyhanger
Registered User
monkeyhanger's Avatar
Canada, ON
Joined Mar 2010
1,272 Posts
>Each one of us are experiencing problems with the copter spooling up with the throttle stick all the way down as well as the throttle trim (as they should be).

I don't have this heli, but it comes with a CT6 transmitter doesnt it? If so, then the problem is that when you have throttle hold turned on, the signal going to the ESC is -100% (channels all range from -100 to +100). When you turn off throttle hold, even with the stick down, trim down, and the throttle curve at 0, the xmitter still puts out about -85% or so on the throttle channel. So what happens is that as soon as you turn off throttle hold, your throttle channel increases by 15%, and the motor starts turning.

That's probably all it is. To know for sure, simply plug in the heli with throttle hold off. Once the esc initializes, turn on throttle hold again until your ready to take off.
monkeyhanger is offline Find More Posts by monkeyhanger
Reply With Quote