Thread: New Product Eflite Fiberglass EDF HABU Thread
View Single Post
Old Jun 15, 2011, 07:18 AM
hotdog1 is offline
Find More Posts by hotdog1
"Chuck Yeager"
hotdog1's Avatar
Bradenton FL
Joined Apr 2010
844 Posts
Quote:
Originally Posted by carguy1994ca View Post
I'm sure Joemamma will have a sweet Habu, having seen what he did with his H-9 twin otter.

I just finished installing the retracts in the wings (yes I got the wimpsy plastic ones...) and used the stock screws with success. I did enlarge the holes a little and used the liquid soap trick, worked real nice.

When working on the wings, the slightest thing on the table surface will mark the wing surface, so be carefull. I did use a piece of foam that was in the box for packaging, but it is still easy to mark the wings.
I too used the stock retract screws with out issue but I did as the manual said and used a 5/64th drill bit. and I also used the foam square from the packaging worked pretty good but the wing is definitly very soft I made marks in mine just removing the stickers.
hotdog1 is offline Find More Posts by hotdog1
Reply With Quote