Thread: New Product Telemetry for your eLogger V4!
View Single Post
Old Apr 10, 2011, 10:28 PM
billpa is online now
Find More Posts by billpa
billpa's Avatar
Joined Nov 2003
4,949 Posts
New Product
Telemetry for your eLogger V4!

We are pleased to announce support for our Seagull Dashboard wireless telemetry system with eLogger V4. Our latest "alpha" software adds this support. Presently, the 900 MHz, 200 milliwatt Seagull version is supported.

All sensors available for the eLogger V4 are displayed on the Seagull Dashboard telemetry screen. The Seagull can also be used simultaneously with our OSD Pro.

To add wireless telemetry to your eLogger V4, just follow these steps:

a) Obtain the "Seagull Wireless Upgrade" (900 Mhz/200mW version), described on this page, if you don't have one already.
b) Connect the Seagull transmitter to your eLogger V4's "LCD/OSD" port, or connect the transmitter as the last item in the daisy chain from this port.
c) Upgrade to our latest alpha (pre-beta) software, located here. Please read the notes here if you are using our OSD Pro also.
c) Configure the Seagull by clicking "Advanced, Seagull Wireless Dashboard setup wizard."

As mentioned, the firmware for the telemetry support is in pre-beta, so please report any bugs encountered!
billpa is online now Find More Posts by billpa
Site Sponsor
Last edited by billpa; Apr 10, 2011 at 10:51 PM.
Reply With Quote