Originally Posted by IBCrazy
That makes some sense, but why would it work fine with a helical antenna? I can place the TX right in front of the helical and get no problems. I fly with a cloverleaf and go 400 feet out and it's still flashing screen at about 3 frames per second. With the cloverleaf, I get no signal at all. This happens with all three of my Lawmate RX's.
I can check the sync on my oscilloscope. I'll see what I am getting there.
First step might be to connect the output of the Lawmate to a monitor and not a digitizer for the PC. You probably have a TV which has a direct video input. You should then be able to tell what the analog signal is really doing instead of depending on digitizers that often do a poor job with anything other than a direct camera input.