Originally posted by TwinSpar
I did manage to loose one of the stock/original winglets and used the remaining one to cut a set from standard 4mm coroplast. I like the double layer coroplast that Justin provides much more than the standard 4mm stuff.
I hope you find this funny, because I sure do.
Those double layered wing tips you mentioned.........
Are really 2 wingtips stuck together. You didn't lose anything
Just pull the wingtips apart and you will have 2-2mm Coro tips.
I cut props down with a small razor saw, and carefully measure and cut the tips. I then sand the tips smooth and use a prop balance to insure the prop is balanced. You do not want the prop causing vibrations.