Thread: Discussion Dynam Turbo Jet
View Single Post
Old Feb 26, 2011, 09:48 AM
ZAGI CRAZEE is offline
Find More Posts by ZAGI CRAZEE
Registered User
United States, MN, Maplewood
Joined Jul 2003
230 Posts
Dynam Turbo Jet

jsc06h, i forgot to tell you that you will have to modify the wing cut outs for the retracts if you go with the ChangeSun retracts, i just used a Dremel to shave out the bay as they are kinda deep retracts, they almost go to the top of the wing,so take your time, and do a little at a time,also be careful that you do not shave too much away from the sides where the mounting screws go, or you will be gluing some light ply in there to use to remount retracts. I had to glue in some ply on the front to remount the nose gear, The ChangeSun retract for the nose comes with a weird "L" bracket and a collar that you use to hook up your pushrod,you can run it off your rudder servo. When the wheel is in the up position, the "L" bracket has a slot in it so the collar can slide up so you can use the rudder while the gear is up, it's pretty neat how it works. Zagi
ZAGI CRAZEE is offline Find More Posts by ZAGI CRAZEE
Reply With Quote