Thread: Discussion HET F-18 90mm RcLander DPS
View Single Post
Old Feb 25, 2011, 09:47 PM
jcdfrd is offline
Find More Posts by jcdfrd
jcdfrd's Avatar
USA, CA, Aromas
Joined Sep 2010
4,858 Posts
I'm building one of these also my setup is as follows
het 9305 w/arc 3655-2 on 8s 4000 nano's or 90mm lander fan 1280kv 8s I haven't decided which one to use the lander claims 7lbs of thrust and I think that will be more than the arc will do but not sure.
cc ice 100 esc
installing the changesun electric retracts v2, just finished the mains and seem to be good, I'm alittle worried about them handling the weight but will see

also i'm modifying the wings to have a 4mm carbon spar in addition to the wimpy one thats provided, I would recommend you do the same if your looking for high speed like I am.
robert at ejf said it will do 130plus on 8s and 150plus on 10s so at those speeds I dont know how the wings will stay on without a better spar.
also mine had alot of dihedral in the wings I removed all of it.
how was the finish on your kit, mine was terrible I'm repainting mine with automotive paint and matching the color
also installing rudders, cant have a 90mm jet without rudders (knife edge baby)

anyway if I can help in any way I will try, theirs not to much info on this jet out there so were kinda flying blind here.

jcdfrd is offline Find More Posts by jcdfrd
Reply With Quote