View Single Post
Old Feb 22, 2011, 05:39 PM
Alexinparis is offline
Find More Posts by Alexinparis
Registered User
Alexinparis's Avatar
Paris, France
Joined Jun 2009
756 Posts
Quote:
Originally Posted by Xnaron View Post
Alex,

Excellent info...is this documented somewhere besides here? I'm a little unclear on one of the steps....

In order to remove the drift when using Auto Level this is the procedure:

1. Fly with level mode on and see the drift direction.
2. land and turn level mode off. (is this what you meant?)
3. adjust the roll/pitch trims on the TX to compensate in the correct direction
4. Fly again and test turning level mode on. If it still drifts go to step 2. Keep doing this until it is basically stable in roll/pitch for drift. Expect to do it at least 3 times.

Is this correct? Did I miss anything?

thanks,
Brendin
not exactly:
1. Fly with acro mode on and see the drift direction.
2. land and adjust the roll/pitch trims on the TX to compensate in the correct direction
3. Fly again ang go to 2) if the trim is not ok
4. calibrate ACC, activate level mode and fly
5. land and adjust the roll/pitch software ACC trims via the TX to compensate in the correct direction
6. Fly again ang go to 5) if the trim is not ok
Keep doing this until it is basically stable in roll/pitch for drift. Expect to do it at least 3 times.
Alexinparis is offline Find More Posts by Alexinparis
Reply With Quote