Originally Posted by Joespeeder
I'm my bumping around with these converters I did see my raw files right from the #11 cam had a bit rate of about 6500 so that's what I set Freemake and AVC to when converting. I see your cams are producing video at 7000bps and other reported higher rates.
What controls the bit rate the cam is shoots at? I'm using the cards you linked. Is there variation from card to card?
My #11 camera has 6500-7000 kbps by defaut with 8 Gb SDHC A-data class 6. Than I did the firmware update with the non date stamp one, and the camera was able to record all videos @ 10.2 Mbps (~10200 kbps). So if you want higher bitrate you have to update the firmware and remove the stamp using this Instructions for turning the timestamp on and off and the driver.