View Single Post
Old Jan 21, 2011, 10:54 AM
dz1sfb is offline
Find More Posts by dz1sfb
Slipping the Surly Bonds
dz1sfb's Avatar
Attica, MI
Joined Dec 2006
11,402 Posts
A6M-5 Zero Ver.3 PLF Style Plans

Somebody awhile back asked for the Zero to be done in the VLF style. Well here it is. I have not shown or specified dihedral in it, but if you have built these before or followed this thread, it is a simple matter to add dihedral while you are building. I believe about 3 degrees would be most asthetically pleasing.

The ESC compartment is quite tight on this, as I kept the gear as far forward as it could tolerate. The HK or Turnigy Plush 10A would fit easily.

Ken

Edit 17-JAN-2012: Pulling the plans for a major revision of this design.
Edit 12-FEB-2012: Version 4 plans uploaded. This change moved the battery over the CG and all components forward 1". I will be building one to verify CG, but feel very good about it.
dz1sfb is offline Find More Posts by dz1sfb
RCG Plus Member
Last edited by dz1sfb; Feb 12, 2012 at 11:32 AM. Reason: Uploaded Revised Plans
Reply With Quote