Thread: Discussion The New Cheapest MEMS Gyro
View Single Post
Old Jan 19, 2011, 08:36 PM
pitchp is offline
Find More Posts by pitchp
No Longer Active
pitchp's Avatar
Australia, VIC, Melbourne
Joined Aug 2010
6,627 Posts
Originally Posted by beenflying View Post
Got to fly my stock Align 450 Sport today (DS420 on tail with a 7.5mm horn setting). It was very windy and I was flying in a fairly small space. The GA250 flew very much like the GP780 and the gain also wanted to be set the same (too high for my liking, so I must try a hole further out on the horn).

The differences I could see was that the GA250 wants to have less expo set in the TX (perhaps some is already built in to the gyro) and the piro stop gain seems to be too high (bounces on stop, which the GP780 didn't do).

The tail also held well in the wind, so for $10 this gyro is a real gem.

I'll report more when I have less wind and more room to throw it around a bit.
Did you figure out how to get this bounce fixed? I too have this, but I think i have the wrong frequency set. I have it on 255hz I'll try with 333hz. this is on the fusonic hd-b-02 tail servo. I wonder if anyone else has this bounce?
pitchp is offline Find More Posts by pitchp
Last edited by pitchp; Jan 19, 2011 at 08:42 PM.
Reply With Quote