Originally Posted by papayankee
I got the same behaviour with a memory card inserted. I'm not sure but it could be after using it in webcam mode.
After pressing the "reset button" ,with the cam disconnected from the USB port
the cam works again
Much thanks to all contributors to this thread .
Edit : Another param.ini input could be the choice between HD720 30F/s and 360VGA 60 f/s
Okay, I admit I havn't been following this but, the yellow flashing could mean you don't have the memory card inserted or maybe you're putting it in the wrong side up (contacts up toward the button side is the correct orientation). Or maybe you could format the card with a standalone formatter like Tom posted.
The camera defaults to the video mode so it shouldn't be going into webcam unless you are doing something to change the mode.
Sorry, you've probably been thru my suggestions but like I said, I haven't been following this very well (like, at all
I'll go back to keeping quite now.