View Single Post
Old Jan 17, 2011, 09:24 PM
Tom Frank is offline
Find More Posts by Tom Frank
Dance the skies...
Tom Frank's Avatar
United States, MA, Walpole
Joined Dec 2003
19,021 Posts
Quote:
Originally Posted by deepinside View Post
So, if I'm doing the pin4-modification I can just use hot glue, right?

Yes my #3 works with the firmware for the HD loaded, although I'm not sure if I'm able to remove the black bar now by repeating the date removal for the #3. Will test it tomorrow.
Use hot glue for what? You have to solder the wire obviously. You might glue the plug cover back on with hot glue, though.

Your #3 camera did NOT load firmware for the HD camera, I can assure you. And the date removal for the #3 leaves the black background on the still pictures. The actual date stamp numbers are removed, but not the black background in the still pictures. No one has figured out how to remove the black background, so save the effort of trying to do the #3 date removal... it won't change anything.
Tom Frank is offline Find More Posts by Tom Frank