: Build Log
Electrolyte micro sport jet (the original thread)
View Single Post
Jan 09, 2011
, 01:39 AM
Team30 Micro EDF
Joined Apr 2004
Here come the repair photos:
Squeezing the fuse flat while the epoxy dries. I sheeted the inside with 1/64" ply to regain the strength lost from the fractured fiberglass.
Buffing up the surface to get all the bumps and chips out.
Here you can see the sheeting.
Some good sanding and smoothing and here it is with the new primer on it. So smooth... so straight...